Table of Contents
Advertisement
4. At the other end of the cable, connect the
USB, video, microphone, and speaker
cables into their respective ports.
5. Connect your USB peripherals into the type
A sockets (one is located on the front, the
second is located on the rear).
6. Connect the power adapter that came with
your switch into the jack on the switch then
connect the adapter to an AC power source.
7. Verify your connections: ports are correct
and that the Icons match the connection
type.
8. Power on the computers.
2-Port Dual-Link DVI KVMP Switch
1
6
5
12
2
2
4
5
3
Advertisement
Table of Contents
