Power Over Ethernet (Poe) - Shure ANI4OUT-XLR Manual

Microflex Advance ANI4OUT Microflex Advance ANI4OUT
3. Drill 4 holes for the screws. The diameter of the holes in the tray are 7.1 mm.
4. Install the components into the tray
5. Install with 4 screws to secure the tray underneath the table

Power Over Ethernet (PoE)

This device requires PoE to operate. It is compatible with both Class 0 and Class 3 PoE sources.
Power over Ethernet is delivered in one of the following ways:
• A network switch that provides PoE
• A PoE injector device
Reset
The reset button is located inside a small hole in the front panel. Use a paperclip or other small tool to press the button.
sig/clip
1
2
3
4
There are two reset functions:
Network reset (press button for 4-8 seconds)
Resets all Shure control and audio network IP settings to factory defaults
Full factory reset (press button for longer than 8 seconds)
Restores all network and web application settings to the factory defaults.
6/21
OUTPUT
1
2
3
power
network
network audio
4
encryption
Shure Incorporated
PoE
reset
2016/08/24