Command Strings (Common) - Shure ANI4OUT-XLR Manual

Microflex Advance ANI4OUT Microflex Advance ANI4OUT
Most parameters will send a REPORT command when they change. Thus, it is not necessary to constantly query parameters. The ANI4OUT will send a REPORT
command when any of these parameters change.
The character "x" in all of the following strings represents the channel of the ANI4OUT and can be ASCII numbers 0 through 4 as in the following table

Command Strings (Common)

< REP x CHAN_NAME {yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy} >
< REP DEVICE_ID {yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy} >
< REP PRESET1 {yyyyyyyyyyyyyyyyyyyyyyyyy} >
< REP PRESET2 {yyyyyyyyyyyyyyyyyyyyyyyyy} >
< REP PRESET3 {yyyyyyyyyyyyyyyyyyyyyyyyy} >
14/21
0
1 through 4
Command String:
< GET x ALL >
ANI4OUT Response:
< REP ... >
Command String:
< GET x CHAN_NAME
ANI4OUT Response:
Command String:
< GET DEVICE_ID >
ANI4OUT Response:
Command String:
< GET PRESET >
ANI4OUT Response:
< REP PRESET nn >
Command String:
< SET PRESET nn >
ANI4OUT Response:
< REP PRESET nn >
Command String:
< GET PRESET1 >
< GET PRESET2 >
< GET PRESET3 >
etc
ANI4OUT Response:
etc
Get All
Get Channel Name
Get Device ID
Get Preset
Set Preset
Get Preset Name
Get Audio Gain
Shure Incorporated
All channels
Individual channels
Where x is ASCII channel number: 0 through 4.
Use this command on first power on to update the
status of all parameters.
The ANI4OUT responds with individual Report
strings for all parameters.
Where x is ASCII channel number: 0 through 4.
Where yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy is 31
characters of the user name.The ANI4OUT always
responds with a 31 character name.
The Device ID command does not contain the x
channel character, as it is for the entire ANI4OUT.
Where yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy is 31
characters of the device ID. The ANI4OUT always
responds with a 31 character device ID.
Where nn is the preset number 01-10.
Where nn is the preset number 1-10. (Leading zero
is optional when using the SET command).
Where nn is the preset number 01-10.
Send one of these commands to the ANI4OUT
Whereyyyyyyyyyyyyyyyyyyyyyyyyy is 25 characters
of the device ID. The ANI4OUT always responds
with a 25 character device ID
2016/08/24