Shure ANI4OUT-XLR Manual page 16

Microflex Advance ANI4OUT Microflex Advance ANI4OUT
< REP x AUDIO_OUT_LVL_SWITCH LINE_LVL >
< REP x AUDIO_OUT_LVL_SWITCH AUX_LVL >
< REP x AUDIO_OUT_LVL_SWITCH MIC_LVL >
< SET x AUDIO_OUT_LVL_SWITCH LINE_LVL >
< SET x AUDIO_OUT_LVL_SWITCH AUX_LVL >
< SET x AUDIO_OUT_LVL_SWITCH MIC_LVL >
< REP x AUDIO_OUT_LVL_SWITCH LINE_LVL >
< REP x AUDIO_OUT_LVL_SWITCH AUX_LVL >
< REP x AUDIO_OUT_LVL_SWITCH MIC_LVL >
< REP x LED_COLOR_SIG_CLIP GREEN >
< REP x LED_COLOR_SIG_CLIP AMBER >
16/21
ANI4OUT Response:
Command String:
ANI4OUT Response:
Command String:
< GET x LED_COLOR_SIG_CLIP >
ANI4OUT Response:
< REP x LED_COLOR_SIGL_CLIP OFF >
< REP x LED_COLOR_SIG_CLIP RED >
Command String:
< SET FLASH ON >
< SET FLASH OFF >
ANI4OUT Response:
< REP FLASH ON >
< REP FLASH OFF >
Command String:
< SET METER_RATE sssss >
ANI4OUT Response:
< REP METER_RATE sssss >
< SAMPLE aaa bbb ccc ddd >
Command String:
< SET METER_RATE 0 >
ANI4OUT Response:
< REP METER_RATE 00000 >
Command String:
< GET LED_BRIGHTNESS >
Set Analog Gain
Get Sig/Clip LED
Flash Lights on ANI4OUT
Turn Metering On
Stop Metering
Get LED Brightness
Shure Incorporated
The ANI4OUT will respond with one of these
strings.
Where x is ASCII channel number: 0 through 4.
Send one of these commands to the ANI4OUT.
The ANI4OUT will respond with one of these
strings.
Where x is ASCII channel number: 0 through 4. It
is not necessary to continually send this command.
The ANI4OUT will send a REPORT message
whenever the status changes.
The ANI4OUT will respond with one of these
strings. This matches the sig/clip LEDs on the front
of the ANI4OUT.
Send one of these commands to the ANI4OUT.
The flash automatically turns off after 30 seconds.
The ANI4OUT will respond with one of these
strings.
Where sssss is the metering speed in milliseconds.
Setting sssss=0 turns metering off. Minimum setting
is 100 milliseconds. Metering is off by default.
Where aaa, bbb, etc is the value of the audio level
received and is 000-060.
aaa = output 1
bbb = output 2
ccc = output 3
ddd = output 4
A value of 00000 is also acceptable.
2016/08/24