3-5.How To Use Remote Controller; Dry Operation; Automatic Operation; Auto Changeover - Carrier 40TSV0131UP Owner's Manual

3-5. How to use remote controller
Cooling / fan only operation
Start
3
4
1
2
1
START/STOP button ( )
Press this button to start the air conditioner.
2
Mode select button (MODE)
Select Cool , or Fan only .
3
Temperature button ( )
Set the desired temperature.
When the air conditioner is in FAN ONLY
operation, the temperature display is not
indicated.
4
Fan speed button (FAN)
+
Select one of LOW , LOW ,
+
MED , MED , HIGH
• The OPERATION lamp (green) on the signal
receiving unit goes on. And operation starts after
approximately 3 minutes.
(If you select FAN ONLY mode, the unit will start
immediately.)
• The : Fan only mode does not control
temperature.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
In the Cool, Dry, or Auto (cooling) mode, the fan runs
for 10 minutes (or more) for self clean operation.
15-EN
1115350208_EN-TH.indb 8 1115350208_EN-TH.indb 8

Dry operation

Start
3
1
2
1
START/STOP button ( )
Press this button to start the air conditioner.
2
Mode select button (MODE)
Select DRY .
3
Temperature button ( )
Set the desired temperature.
• The fan speed display indicates
• The OPERATION lamp (green) on the signal
receiving unit lights, and operation starts after
approximately 3 minutes.
.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
In the Cool, Dry, or Auto (cooling) mode, the fan runs
for 10 minutes (or more) for self clean operation.

Automatic operation

(auto changeover)

Start
3
4
1
2
1
START/STOP button ( )
Press this button to start the air conditioner.
2
Mode select button (MODE)
Select A.
3
Temperature button ( )
Set the desired temperature.
4
Fan speed button (FAN)
+
Select one of LOW , LOW ,
+
MED , MED , HIGH
• The OPERATION lamp (green) on the signal
receiving unit lights.
The operating mode is selected in accordance with
the room temperature and operation starts after
approximately 3 minutes.
• If the "A" mode is uncomfortable, you can select the
desired conditions manually.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
In the Cool, Dry, or Auto (cooling) mode, the fan runs
for 10 minutes (or more) for self clean operation.
– 8 –
.
3/29/2559 BE 6:54 PM 3/29/2559 BE 6:54 PM
EN
TH
16-EN