Carrier 40TSV0131UP Owner's Manual page 10

Timer operation
Use the wired remote controller for timer setting if it is
also in use.
ON timer and OFF timer
1
3
ON OFF
2
Setting TIMER
1
Push ON / OFF TIMER button ( or ) during
ON OFF
operation.
Press the ON or OFF TIMER buttons as required.
• The previous timer setting is displayed and
flashes along with ON / OFF timer display.
Set the timer to the desired time.
Each press of the TIMER button changes the time
in ten minute steps.
Pressing the TIMER button continually changes
the time in one hour step.
2
SET button
Press the SET button to set the timer.
The timer time is indicated and the timer starts.
Cancelling TIMER
3
CLR button
Press the CLR button to cancel the timer
setting.
17-EN
1115350208_EN-TH.indb 9 1115350208_EN-TH.indb 9
CAUTION
• When you select the timer operation, the remote
controller automatically transmits the timer signal to
the indoor unit at the specified time. Therefore, keep
the remote controller in a location where it can
transmit the signal to the indoor unit properly.
Otherwise, the time lag of up to 15 minutes will occur.
• If you do not press the SET button within 30
seconds after setting the time, the setting will be
cancelled.
Once you select the timer operation mode, the settings
are saved in the remote controller.
Thereafter, the air conditioner will start operating under
the same conditions when you simply press the ON /
OFF button of the remote controller.
If the clock display is flashing, you cannot set the timer.
Follow the instructions in the section "Setting the clock"
and then set the timer.
Combined timer (Setting both ON
and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in
the morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next
morning.
Operation Operation again
Stop
Setting combined TIMER
1
Press the OFF TIMER button to adjust the
OFF
OFF timer.
2
Press the ON TIMER button to adjust the
ON
ON timer.
3
Press the SET button.
– 9 –
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner
when you wake up and stop it when you leave the
house.
Example:
To start the air conditioner next morning and stop it.
Operation
Stop Stop
Setting combined TIMER
1
Press the ON TIMER button to adjust the
ON
ON timer.
2
Press the OFF TIMER button to adjust the
OFF
OFF timer.
3
Press the SET button.
• Either ON or OFF timer function which is closer to
the current time, is activated first.
• If the same time is set for both ON and OFF timers,
no timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer
(setting both ON and OFF timer
simultaneously and activate every
day)
This feature is useful when you want to use combined
timer at the same time every day.
Setting combined TIMER
1
Press the ON TIMER button to adjust the
ON
ON timer.
2
Press the OFF TIMER button to adjust the
OFF
OFF timer.
3
Press the SET button.
4
After step 3, an arrow mark ( or ) flashes
for about 3 seconds and during this flashing,
press the SET button.
• During the every day timer is activating, both arrows
( , ) are indicated.
Cancel the timer operation
Press the CLR button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, press SET button
briefly and the present time is displayed about 3
seconds.
18-EN
3/29/2559 BE 6:54 PM 3/29/2559 BE 6:54 PM