6
Troubleshooting
When Indicators are Lit or Blink
The indicators light and blink to indicate the machine's status. The following symbols are used in
this section to show the different indicator patterns. (G=Green, O=Orange and R=Red)
Example: G
=Indicator blinks in green
Power
G
O
G
O
(once every
second)
O
(once every 2
seconds)
G
G
O
(off)
: Indicator is lit
: Indicator is blinking
(off) : Indicator is off
Status
Machine is on
(off)
Initializing
(off)
Cover open
Preparing to print
(off)
Transferring
Setup standby during copy printing
(off)
Cooling
Remaining tape/remaining fabric ribbon/remaining ink
(off)
ribbon/size confirmation mode
R
Tape incorrectly attached to the paper core
(once every 1.8
Top cover open
seconds)
Cutter error: Close the cover, and then turn the machine off,
R
then on again.
(twice every 1.8
Power supply fan motor error: The power supply fan motor is
seconds)
not operating. Turn the machine off, then on again.
System error
R
Boot mode (operating system error)
R
Description
6
6
6
51