Table of Contents
Advertisement
Chapter 2
Creating Multiple Tapes or
Fabric Ribbons
By using copy printing in P-touch Editor 5.1,
you can create multiple copies of tapes or
fabric ribbons with the same design.
In Express mode
a
After creating the tape or fabric ribbon
design, click [Print].
The [Print] dialog box appears.
b
After specifying the desired number of
copies in [Copies], click [Print] to begin
printing.
In Professional mode
a
After creating the tape or fabric ribbon
design, display the Print Properties (1).
b
In
(2), specify the desired
number of copies.
c
Click
(3) to begin printing.
3
1
2
When a roll of tape has been printed
with copy printing
a
When a roll of tape has been printed
with copy printing, the machine will
automatically stop.
The indicator blinks in green, and the
machine is in setup standby.
30
b
Open the top cover and bottom cover of
the machine, and then remove the
printed tape or fabric ribbon.
2
After printing on fabric ribbon, use
scissors to cut it, and then remove the
printed fabric ribbon.
c
Install a new paper core.
For details, see Installing the Paper
Core Holder on page 15.
d
Close the covers, and then press the set
button (
Printing continues.
2
).
Advertisement
Table of Contents
