Table of Contents
Advertisement
*Fabric ribbon cannot be cut by pressing this
button. Use scissors to cut fabric ribbon.
7 Status indicator
8 MENU/ESC button
While the machine is in standby, press this
button to display the parameters that can be
specified from the machine.
While performing operations with the buttons,
press this button once to return to the previous
screen.
Settings for the following parameters can be
specified from the machine.
Display Setting
Switches the main screen between the
Details Mode and the View Mode.
• Details Mode
• View Mode
NOTE
When the remaining quantity of tape, ribbon
and ink is less than a set amount, "!" appears
on the screen.
Backlight
Unit
Language
Set the language for the screens that
appear.
Auto Power Off
LCD Contrast
Cut Option
Check Size
By default, a message will appear if the ink
ribbon cassette is wider than the installed
tape cassette. Printing will be possible after
pressing the OK button.
To set the machine so no message
appears when the installed ink ribbon
cassette is wider than the tape cassette,
select [Off].
Printer Configuration
Network Configuration
Displays the IP address, subnet mask and
gateway address for the machine.
Reset
9
/
buttons
Continues to the next screen, or returns to the
previous screen.
10 OK button
Press to apply the selection.
Getting Started
1
13
Advertisement
Table of Contents
