Table of Contents
Advertisement
d
Select settings for [Printer] and
[Language], select the check box
beside the P-touch Editor to be updated,
and then click [Install].
A message appears, indicating that the
installation is finished.
P-touch Editor has been updated.
e
Select a setting for [Printer], check that
[The machine is connected correctly.]
appears, and then click [OK].
f
Select a setting for [Language], select
the check box beside the firmware to be
updated, and then click [Transfer].
When a confirmation message appears,
check the details of the data to be
transferred, and then click [Start].
Do not turn off the machine or
disconnect the cable while data is being
transferred.
g
After the transfer is completed
successfully, click [OK] to complete the
operation.
Software
2
35
Advertisement
Table of Contents
