Mounting The System To The Rack - Cisco 2000 4xGBE Quick Start Manual

Mounting the System to the Rack

When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the rack.
Make sure that the rack brakes are locked or that the rack is otherwise stabilized.
Caution
Slide the SCE 2000 into the rack, pushing it back until the brackets (installed at the front of the unit) meet the mounting
Step 1
strips or posts on both sides of the rack.
Figure 8 Sliding the SCE Platform into the Rack
PWR A
PWR B STATUS BYPASS Cisco SCE
MNG 1 MNG 2 2000
LINK/ 10/100/ CONSOLE AUX LINK RX TX 4xGBE Series
ACTIVE 1000 LINK/ ACTIVE 10/100/ 1000 LINK RX TX
LINK RX TX
RX MM LINK RX TX
TX RX MM TX
RX MM TX
GBE-1 RX MM TX
SUB LINE
NET SUB LINE/CASCADE GBE-2
NET
PW R A
PW R B
STA TUS
BYP ASS
MN G 1
MN G 2
CO NSO LE
AU X
LINK /
10/1 00/
ACT IVE LINK /
1000 10/1 00/
ACT IVE
1000
1
A rack with both front and back posts will have the crossrail supports installed. Slide the SCE 2000 onto these crossrails
and push it all the way back.
8
C is co SC
E 20 00
Se rie s
LINK RX 4x G BE
TX
LINK RX
TX
LINK RX
TX
LINK RX
TX
RX
MM
TX
RX
MM
TX
RX
MM
TX
RX
MM
GBE -1 TX
SUB
LINE
NET
GBE -2
SUB LINE
/CA SCA DE
NET
2 3