Installing A Service Control Application - Cisco 2000 4xGBE Quick Start Manual

connection-mode inline on-failure bypass
no silent
no shutdown
flow-filter partition name "ignore_filter" first-rule 4 num-rules 32
flow-filter partition name "udpPortsToOpenBySw" first-rule 40 num-rules 21
attack-filter subscriber-notification ports 80
replace spare-memory code bytes 3145728
interface FastEthernet 0/0
ip address 172.29.52.245 255.255.255.0
interface FastEthernet 0/1
ip address 172.29.52.245 255.255.255.0
interface GigabitEthernet 0/1
auto-negotiate
global-controller 0 name "Default Global Controller"
interface GigabitEthernet 0/2
auto-negotiate
global-controller 0 name "Default Global Controller"
interface GigabitEthernet 0/3
global-controller 0 name "Default Global Controller"
interface GigabitEthernet 0/4
global-controller 0 name "Default Global Controller"
exit
ip default-gateway 172.29.52.1
line vty 0 4
timeout 180
exit
interface Mng 0/1
exit
interface Mng 0/2
exit
aaa authentication login default local
management-agent property "com.pcube.management.framework.install.activation.operation" "Install"
management-agent property "com.pcube.management.framework.install.activated.version" "3.5.5 build 127"
management-agent property "com.pcube.management.framework.install.activated.package" "SCA BB"
management-agent property "com.pcube.management.framework.install.activation.date" "Tue Jun 04 20:57:48
GMT+00:00 2009"
ip rpc-adapter security-level none
SCE#copy running-config startup-config
Writing general configuration file to temporary location...
Backing-up general configuration file...
Copy temporary file to final location...
SCE#

Installing a Service Control Application

The Service Control solution requires that the Service Control application be installed on the SCE platform. This is a pqi file
that is installed and configured using the Cisco Service Control Application for Broadband (SCA BB) console.
For an explanation of how to install the pqi file, s ee "Installing the Application and Protocol Pack on the SCE Platform" in the
Cisco Service Control Product Installation Guide.
For information on initial configuration of the application, see "Initial SCA BB Configuration" in the Cisco Service Control
Product Installation Guide.
For complete instructions on how to install and configure the SCA BB application,
see the Cisco Service Control Application for
Broadband User Guide.
24