Advertisement
H-LCD2000Service Manual
Volume Control
Press the【VOL+】/【VOL-】 to decrease or increase the volume continuous when there
is no any menus displayed on the screen. The range is 0-100.
The Volume menu will exit automatically if there is no operation within 6 seconds.
Mute
Press the【MUTE】on the remote control to turn On/Off the MUTE mode.
The
symbol always remains on the upper-right corner of the screen whenever you do
any operation unless you turn the Mute OFF.
Press the【MUTE】again to turn the Mute off.
Altering the value of volume, treble, bass or balance can also turn the Mute OFF.
When there is no signal and with a blue background on the screen, the TV will mute.
Note:
In S-Video, AV, and YPbPr modes, when there is no signal and with blue background on
the screen, the TV will not mute.
Picture Mode Selection
Press the【P.MODE】to switch between user, soft, standard and bright modes.
The value of Soft, Standard, and Bright are the default setting, and they cannot be
adjusted.
In this function, only the User mode can be adjusted.
Note:
In S-Video, AV mode, the setup and operation are same to the TV mode.
No this function in YPbPr mode.
Information Display
In TV mode, except the searching process, when there is any menu displayed on the
screen, press the【DISPLAY】to turn it off. Press【DISPLAY】again, the CHANNEL
NUMBER, TIMER, SIGNAL SOURCE, OFF DISPLAY modes will appear on the screen
orderly.
Channel
Number
Note:
In AV, S-Video, YPbPr modes, there is no channel number display.
Channel Number Display:
Only in TV mode, the current channel number can be displayed on the upper-right corner
of the screen.
Timer
Display
8
Signal
Source
Page 8 of 57
OFF
Display
Advertisement
