Advertisement
H-LCD2000Service Manual
【P.MODE】
10
【MUTE】
11
【VOL+】 【VOL-】
12
【CH+】 【CH-】
13
【S. MODE】
14
【FREEZE】
15
【SCALING】
16
17, 18
【 】/【 】
19, 20
【
】/【
【PC/TV】
21
【C.TEMP】
22
【AUTO】
23
24, 25, 26
Remain buttons
Note:
①When in operation, please point your remote control directly to the infrared sensor.
②Do not expose the remote control to impacts, water or disassemble it.
③Do not repeatedly press the buttons on the remote control. Allow interval of no less than
one second between selections.
I. In TV, S-Video, AV, and YPbPr Modes
General Operation
Standby Mode
Press the【 】on the TV panel or the【POWER】on the Remote Control, the LCD TV will
store the current setup and enter into the standby mode with a black background. When
press the button again, the LCD TV works again.
TV/AV Signal Switch
Press the 【SOURCE】on the panel or the【TV/AV】on the remote control to select the
signal sources orderly. They are TV, S-Video, AV, PC, and YPbPr.
Press【PC】to switch between TV and PC directly.
Channel Switch
signal sources
Switch between User, Soft, Standard and Bright
modes
Turn the MUTE ON/OFF
Increase/Decrease the volume or exit from the
mute mode
1. In TV mode, increase/decrease the channel
number
2. Switch from other signal sources to TV mode
rapidly
Switch between User/Music /standard/ theater
mode orderly
Invalid buttons for this product
Invalid buttons for this product
Select functions in menu
Adjust the fixed menu items
】
Switch between TV and PC signal directly
Switch between User, Cool, Neutral and Warm
modes in PC mode
Adjust the picture's quality automatically in PC
mode
Invalid buttons for this product
6
Page 6 of 57
Advertisement
