Advertisement
H-LCD2000Service Manual
Page 2 of 57
SAFETY INSTRODUCTIONS AND MAINTENANCE
All instructions must be read and understand well before you operating this product.
Heed all warnings and follow all instructions.
Please use the attachment recommended by the manufacturer. Use the inadequate
attachments may result in accidents.
Please adjust the product through the panel buttons or the remote control, do not
remove the cover or attempt to service the product by yourself.
Do not place the product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious personal injuries as well as the damage to the
product.
Unplug the power cord from the AC outlet when the product is unused for long
periods of time or during a lightning storm.
Protect the power cord from being walked on or pinched particularly at plugs to avoid
the electric shock. When unplug the plug, always hold the wide slot, do not touch the
metal part.
Do not expose the remote control to shock, liquids, and do not place it in an area with
high humidity. Please use the qualified batteries and do not mix batteries with
different types. Do not mix old and new batteries, and do not place the batteries to fire
or disassemble them. If the remote control is unused for an extend period of time,
remove batteries from the remote control.
Place the signal cord back of the product.
Unplug the power cord from the AC outlet before cleaning the product. Do not use
liquid cleaners or aerosol cleaners; use the special LCD Panel cleaners. Keep the
power off before LCD panel dry completely.
Do not use volatile cleaners or you may damage the LCD Panel/Covers.
Do not overexert or touch the panel when you convey the product.
Caution: Over-press the panel may destroy the product.
To ensure not to get an electric shock or short circuit, please do not spill liquid or other
objects into the product.
Please place the product on a flat surface in a well-ventilated location. Keep it away
from the burning-light, high-temperature, and humidity. Store the product with a
temperature from –20℃ ~50℃; Otherwise you may destroy the product.
The temperature of the product's body will become a little higher after a long period
use. This phenomenon indicates that the product is exhausting the quantity of heat in
normal working mode, but please do not let children or anyone who is sensitive of
temperature to touch.
Unplug the power cord from the AC outlet and contact our service personnel to repair
under the following conditions:
A. When a liquid has been spilled or objects have fallen into the product.
B. Although you have operated the product by following the operating instructions, it
still cannot work normally.
C. Any obvious abnormality in the product.
Install your LCD TV in a room where direct sunlight will not fall upon the screen.
2
Advertisement
