Starting The Remote Console; Set Up The System Console That Os X Is Running - Hitachi Compute Blade 2500 Getting Started Manual

Operating
system of
the server
Windows
Linux

Starting the remote console

This section describes how to start the remote console. You can start the
remote console from a Web console that is logged in to the management
module or a server blade.
If the system console is running on OS X, you must install the certificate file
and enable Java accessibility in advance.

Set up the System console that OS X is running

If you want to use a PC running OS X as the system console, you must set up
the environment as follows in advance:
• Install the certificate file.
• Enable Java accessibility.
Installing the certificate file
1 In Finder, from the Go menu, execute the Utilities command.
.
The Utilities window opens.
2 In the Utilities window, execute the Terminal icon.
.
The Terminal window opens.
3 In the Terminal window, enter the following commands:
.
5-4
VGA driver
• Display driver in Server
installation and monitoring tool
(recommended)
• Standard SVGA driver
VESA driver
Functionality and Operation of the Remote Console
Hitachi Compute Blade 2500 Series Getting Started Guide
Display resolution
800 x 600
1024 x 768
(recommended)
1280 x1024
1600 x 1200
640 x 480
800 x 600
1024 x 768
(recommended)
Number of
colors
16 bits
32 bits
16 bits
32 bits
16 bits
32 bits
16 bits
32 bits
16 bits
32 bits
16 bits
32 bits
16 bits
32 bits