Specifications Of The Server Chassis; Specifications Of Server Blades - Hitachi Compute Blade 2500 Getting Started Manual

Specifications of the server chassis

The following table shows the specifications of the server chassis.
Appearance
information
Number of slots
Chassis size
Front panel
Weight
Temperature
Humidity
Vibration
Cooling

Specifications of server blades

The following table shows the specifications of server blades.
A-2
Table A-1 Specifications of the server chassis
Item
Type
Height
Server blade
Switch module
Management module 2 (redundancy)
Management LAN
module
I/O board module
Power supply module 2 (at shipping time). A maximum of 6
Fan module
Cooling fan control
module
Height
Width
Depth
method
Flow rate
System Unit Specifications
Hitachi Compute Blade 2500 Series Getting Started Guide
Specifications
19-inch rack-mount (EIA standards)
12 U (EIA standards)
15
2
2 (redundancy)
28
modules can be installed (redundancy).
10 (redundancy)
2 (redundancy)
527 mm (excluding projections)
447 mm (excluding projections)
830 mm (excluding projections)
Embedded in the management module
Maximum: 250 kg
(This is the value when all modules are
installed, and includes the weight of the
rack rails.)
5 to 40 °C (When not operating: -10 to 43
°C)
8 to 80% (When not operating: 8 to 90%)
Maximum of 2.45m/s5 (When not
operating: 9.80 m/s5 max.)
Air cooling by fans
Air suction port: Front side
Air exhaust port: Rear side
14.4 m3 / min