Samsung WM1255AGS/XEN Service Manual page 71

NO. Type Part
DRUM appearance part Being opened & closed
WASHER
1
DRUM appearance part Label(sticker) being detached consulting ...for the specification or label of product
WASHER
2
DRUM appearance part Accessories being not
WASHER
3
DRUM appearance part Color coming off/rust
WASHER
4
DRUM display part
WASHER
5
DRUM display part
WASHER
6
DRUM display part
WASHER
7
DRUM display part
WASHER
8
DRUM door related
WASHER
9
DRUM a noise
WASHER
10
DRUM a noise
WASHER
11
Solut ion
Situati on
method
AS
bad/Being attached & rerecomm
detached bad ended
AS
included rerecomm
ended
AS
rerecomm
ended
Display part being not lit up/ AS
not being cleared rerecomm
ended
Character being broken on AS
display rerecomm
ended
Display not being cleared AS
rerecomm
ended
Display malfunction AS
rerecomm
ended
Door sensor not being Others
detected
A noise being occurred General
intermittently during washing consulting
A noise being occurred General
intermittently during consulting
Before consu lti ng
lead the customer to attach diretly or
send the engineer to do so. For other
advertisement or PR label it may not be
attached.
..Check whether the componets are
same as those in the manual. If not
contact to SVC.
..Make a comment for the customer to
prepare the memorandum since he can
cause
In case of a cover not being opened or closed
It may be occurred when the machine is installed
in the humid place which causes the rust or
discoloring.
It is a symptom occurred when it is installed in
the humid place or the water is entered its inside.
Please check whether a washer is installed and
used with removing the safety device positioned
at its rear.
Did you remove the washer safety device? It
may be occurred when the laundry is leaned to
☞ Door is
drying the d
safe level.
▶ Is it the
it is for adv
is not attac
☞ Sir we re
product wh
best to clea
☞ Being ru
to the time
replaceme
the location
☞ Dry the
engineer's
☞ In this c
☞ In this c
☞ In this c
☞ In this c
☞ You are
removed a
☞ Please c
direction an