Samsung WM1255AGS/XEN Service Manual page 26

200
4°C every 5sec during the operation of washing heater, this
error will occur. If higher than 100°C of the washing water is
HE
detected for longer than 6sec at the temperature sensor, this
error will occur also.
(due to a fire caused by an operation of washing heater
without water)
If the water temperature remains less than 50°C for longer
than 10min after the operation of washing heater, or if it
Heater
HE1 doesn't increase to 2°C higher than the initial temperature of
abnormal
the heater for longer than 8sec, this error will occur. (caused
by breakdown of washing heater or opening of thermostat)
If the fan housing temperature remains less than 35°C for
preheat dehydration/low temp drying or less than 50°C for
drying of the others, and if it doesn't rise to 5°C higher than
HE2 the initial temperature of the heater for longer than 8sec, this
error will occur.
(caused by breakdown of drying heater or opening of
thermostat)
If the water temperature doesn't fall to lower than 55°C for
longer than 30min after the start of washing water cooling,
Cooling
CE this error will occur. If the fan housing temp sensor doesn't
abnormal
fall to lower than 70°C for longer than 30min after the start of
cooling of the last internal temperature for drying.
If time sum of retrial for sensing vibration during dehydration
Unbalance becomes longer than about 10min, this error will occur at
UE
error third times after 2-times operation of cloth-untwisting during
water feeding and whirling.
If the washing water temperature is increasing more than
- 23 -
Open the main
relay at once,
and Power will
be automatically
off after 5sec.
Power Off
Power Off
Start button
Start button