Samsung WM1255AGS/XEN Service Manual page 19

below 55℃.
- You cannot select the add laundry function during the Clean-tub course
When selecting the add laundry key, if the machine is already operating, the machine stops
●
temporarily.
When the add laundry key is pressed, the machine stops the drum rotating and drains the
●
water to below the door lock level.
Add Laundry
Pumping Rate
When the water level falls below the door-open level and the door is open, the add
●
laundry process is cancelled.
The add laundry LED turns on or off as below;
●
a. When the door is closed and the temp. sensor of the fan housing is below 70℃ and the water
is below 55℃, the add laundry LED turns on to inform you that the add laundry key can be
selected.
b. When the add laundry key is selected and the machine stops the drum rotating or drains
water, the add laundry LED blinks to inform you that it is in process.
c. When the door lock is off or the temperature is high, the add laundry LED turns off.
Door Unlock
Conditions
The door can be opened when all conditions above are satisfied.
9) Start/Pause Button
This button enables the selection of one of two functions in the order of Pause → Start →
Pause → Start ㆍㆍ .
22 sec.
The water level is higher than 23.95kHz or the water temp is
below 55℃.
The temp. sensor of the fan housing is below 70℃.
The water level is below 22.90kHz (10Kg) or 22.60kHz (12Kg).
The drum has stopped rotating.
ON OFF
4 sec.
- 16 -