Samsung WM1255AGS/XEN Service Manual page 41

Part Name
Heater
Replacemen
t
Figure
A
- 38 -
Method of Repair
1. Remove the frame plate U
- Loosen the screws between the housing fan "U"
and "L"
- Loosen the screws between the housing fan "U"
and the tub (Point A)
2. Loosen the three screws for fixing the heater
Check Point
1. Measure the heater resistance
(The resistance between the common terminals:47
Ω )
2. Check the connecter for any problem.
※ Note
Remove the detergent case side
of HOSE-AIR (A), not the tub
side when replacing the dry
heater, the fan or the detergent
case. When removing the tub side
of HOSE-AIR, the screws can fall
inside the tub.