Product Specifications; Overview Of The Control Panel - Samsung WM1255AGS/XEN Service Manual

3.

PRODUCT SPECIFICATIONS

3-1. OVERVIEW OF THE CONTROL PANEL

1. Cycle Display LED
It displays the present operating cycle and the setup cycle.
●
Pressing the Pause button displays the amount of cycles remaining.
●
2. Power Switch
This switches the power ON/OFF.
●
3. Start Switch
This is used to Start/Pause the operation.
●
4. Jog Dial Switch
This selects one of the washing courses.
●
The order of the washing courses is as follows: Towel/Cotton/Cotton95 ℃ /Cotton75 ℃ /Coloureds
●
/Quick/Wool/Delicate/Bedding/Clean Tub.
5. Types of Functional Buttons
1) Temperature Setting Button
This sets the temperature of the wash.
●
However, there is a different temperature limit for each course.
●
The temperature can be selected in the successive order of ℃
●
→ 60 ℃ → 75 ℃ → 95 ℃ .
The selection of the temperature is only available for the Wash Cycle.
●
It is impossible to set the wash temperature during a wash.
●
If the wash temperature button is pressed during washing, the selected temperature is
●
displayed for 3 seconds.
If a temperature is selected, it switches the ℃ LED on.
●
2) Silver Wash Button
Silver Nano particles are supplied during the wash and rinse cycles.
●
The time consumed for the rinse cycle will be longer than for other courses.
●
You could not select the key after the start of any operation.
●
When you select the silver nano key in a single cycle mode, the cycle is set to the default
●
of the normal course and you can only select the silver nano key in wash or rinse cycles.
When the silver nano key is selected, the silver nano kit starts operating its anti-bacteria
●
function.
- Silver Sterilization: the silver nano kit starts operation in water supply for the washing
cycle or additional supply.
(
- 14 -
Cold Water) → 30 ℃→ 40 ℃