NordicTrack C 900 Quick Assembly Manual

Hide thumbs Also See for C 900:

Download this manual

UICK

SSEMBLY

NORDICTRACK

C 900 • Model No. 831.24959 • Revised 9/19/12

For detailed instructions, see the User's Manual. Note: There may be an oily substance on the exterior of the

treadmill. If there is an oily substance on the treadmill, simply wipe it off with a soft cloth and a mild, non-abrasive

cleaner.

#10 Star

Washer (5)–4

#8 x 1/2" Ground

Screw (10)–1

3/8" x 1 1/4"

Screw (8)–4

3/8" x 2 1/4" Screw (7)–4

5/16" x 1 1/2"

Bolt (4)–4

UIDE

5/16" Star

Washer (11)–8

Washer (13)–4

#8 x 1/2"

Screw (1)–16

3/8" x 1 3/4" Bolt (6)–1

3/8" Star

#8 x 3/4" Screw

(2)–2

3/8" x 2" Bolt (3)–1

5/16" x 2 3/4"

Screw (28)–4

3/8" Nut (12)–2

#10 x 3/4" Screw

(9)–4

5/16" x 3/4"

Screw (4)–4

Page 1 SSEMBLY UIDE NORDICTRACK C 900 • Model No. 831.24959 • Revised 9/19/12 ® For detailed instructions, see the User’s Manual. Note: There may be an oily substance on the exterior of the treadmill. If there is an oily substance on the treadmill, simply wipe it off with a soft cloth and a mild, non-abrasive cleaner.
Page 2 1. Pull the Upright Wire (81) through the Base (94). 3. Attach the Left Upright (89) and the Right Attach the ground wire (A). Upright (not shown). Slide the Left and Right Base Covers (not shown) onto the Uprights. Square Hole Hole 2.
Page 3 5. Remove screws and the Pulse Crossbar (93) 8. Attach the Inside Upright Covers (88, 95). from the Console Base (64). 6. Attach the Trays (27, 36). 9. Attach the Pulse Crossbar (93). 7. Attach the Outside Upright Covers (87, 96).
Page 4 14. Attach the upper end of the Storage Latch (53). 12. Attach the Pulse Crossbar (93) to the console assembly. NORDICTRACK is a registered trademark of ICON IP, Inc. Part No. 339843 R0912A Printed in USA © 2012 ICON IP, Inc.