NordicTrack 831.25044.0 User Manual
  1. Manuals
  2. Brands
  3. NordicTrack Manuals
  4. Treadmill
  5. 831.25044.0
  6. User manual

NordicTrack 831.25044.0 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

www.nordictrack.com
Model No. 831.25044.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for NordicTrack 831.25044.0

Summary of Contents for NordicTrack 831.25044.0

  • Page 1 Model No. 831.25044.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.

  • Page 2: Table Of Contents

    Bluetooth SIG, Inc. and are used under license. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. NORDICTRACK is a registered trademark of ICON Health & Fitness, Inc.

  • Page 3: Important Precautions

    19. To purchase a surge suppressor, see your local 4. The treadmill is intended for home use only. NORDICTRACK dealer, call the telephone Do not use the treadmill in any commercial, number on the front cover of this manual, or rental, or institutional setting.
  • Page 4 20. Keep fingers, hair, and clothing away from 26. Never insert any object into any opening on the moving walking belt. the treadmill. 21. The treadmill is capable of high speeds. 27. Inspect and properly tighten all parts each Adjust the speed in small increments to time the treadmill is used.
  • Page 6 STANDARD SERVICE PLANS...

  • Page 7: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK C 950I treadmill. The C 950I tread- manual. To help us assist you, please note the product ® mill offers an impressive selection of features designed model number and serial number before contacting us.

  • Page 8: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

  • Page 9: Assembly

    ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 8. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex key materials until you finish all assembly steps.
  • Page 10 2. Make sure that the power cord is unplugged. Next, remove the tie securing the Upright Wire (81) to the front of the Base (94). Identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing.

  • Page 11: Star Washer (13) Through The Wheel As Shown

    4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Next, hold a Wheel (25) inside the Base (94), and insert a 3/8" x 1 3/4" Screw (62) with a 3/8" Star Washer (13) through the Wheel as shown;...
  • Page 12 6. Attach a Handrail (86) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11) in the location shown; do not fully tighten the Screws yet. Make sure not to pinch the Upright Wire (81), and make sure that the wire is on the side of the Upright as shown.
  • Page 13 8. Set the console assembly (F) face down on a soft surface to avoid scratching the console assembly. Remove and save the four 1/4" x 1/2" Screws (34). 9. Hold the console assembly (F) near the Pulse Crossbar (93). See the inset drawing. Connect the pulse wires (G, H).
  • Page 14 10. Insert the Upright Wire (81) through the two indicated looped ties (I) on the console assembly (F). See the inset drawing. Connect the Upright Wire (81) to the console wire (J). The connec- tors should slide together easily and snap into place.
  • Page 15 12. Identify the Right and Left Trays (27, 36). Attach the Trays (27, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. 13. Carefully slide the Upright Crossbar (41) between the Left and Right Uprights (89, 90). Attach the Upright Crossbar with the four 5/16"...
  • Page 16 14. Identify the Right Handrail Cover (85). Set the Right Handrail Cover on the right Handrail (86). Start two #8 x 3/4" Truss Head Screws (14) into the bottom of the Handrail Cover; do not fully tighten the Screws. Next, slide the Right Handrail Cover (85) for- ward until it rests against the console assembly (F).
  • Page 17 16. Remove the 5/16" Nut (12) and the 5/16" x 1 3/4" Bolt (6) from the bracket on the Base (94). Next, orient the Storage Latch (53) as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with the 5/16" x 1 3/4"...
  • Page 18 18. Firmly tighten the four 3/8" x 2 1/4" Screws (7), the two 3/8" x 1 3/4" Screws (62), and the two 3/8" x 1 1/4" Screws (63). Do not over- tighten the Screws. Set the Left Inner Base Cover (113) onto the lower end of the Left Upright (89).

  • Page 19: How To Use The Treadmill

    HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same circuit.
  • Page 20 CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 21. To use the man- ual mode, see page 21. To use an onboard workout, see page 23. To use a custom-focus weight loss The treadmill console offers an impressive array of workout, see page 24.
  • Page 21 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
  • Page 22 5. Change the incline of the treadmill as desired. To reset the displays, press the Stop button repeat- edly, or remove the key and then reinsert the key. To change the incline of the treadmill, press the 7. Measure your heart rate if desired. Incline increase and decrease buttons or one of the Quick Incline buttons.
  • Page 23 8. Turn on the fan if desired. HOW TO USE AN ONBOARD WORKOUT The fan features multiple speed settings and an 1. Insert the key into the console. auto mode. When the auto mode is selected, the speed of the fan will automatically increase See HOW TO TURN ON THE POWER on page 21.
  • Page 24 5. Follow your progress with the displays. HOW TO USE A CUSTOM-FOCUS WEIGHT LOSS WORKOUT See step 6 on page 22. If you select an onboard 1. Insert the key into the console. workout, the display will show the time remaining instead of the elapsed time.
  • Page 25 HOW TO CONNECT YOUR SMART DEVICE TO THE THE OPTIONAL CHEST HEART RATE MONITOR CONSOLE Whether your The console supports BLUETOOTH connections to goal is to smart devices via the iFit app and to compatible heart burn fat or to rate monitors.
  • Page 26 HOW TO USE THE SOUND SYSTEM HOW TO ADJUST THE CUSHIONING SYSTEM To play music or audio books through the console Remove the key from the console and unplug the power cord. In order to adjust the cushions, you may sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack need to place the treadmill in the storage position (see...

  • Page 27: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left.

  • Page 28: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal perfor- as shown, the switch has tripped. To reset the mance and to reduce wear. Inspect and properly tighten power switch, wait for five minutes and then press all parts each time the treadmill is used.
  • Page 29 SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless a. Hold down the Stop button and the Speed increase instructed to do so by an authorized service button, insert the key into the console, and then release the Stop button and the Speed increase...
  • Page 30 b. If the walking belt slips when walked on, first SYMPTOM: The tablet holder does not stay in place remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. Rotate the tablet holder backwards. Then, tighten screws clockwise, 1/4 of a turn.

  • Page 31: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 32: Suggested Stretches

    SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
  • Page 33 NOTES...

  • Page 34: Part List

    PART LIST Model No. 831.25044.0 R0915A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw – (Not Used) #8 x 3/4" Screw – (Not Used) 5/16" x 2 1/4" Bolt Storage Latch 5/16" x 3/4" Screw Drive Motor...
  • Page 35 Key No. Qty. Description Key No. Qty. Description #3 x 1/4" Screw Controller Clamp Fan Screw Incline Leg Bushing Tablet Holder Incline Leg Washer Left Speaker Grill Left Inner Base Cover Right Speaker Grill Right Inner Base Cover Speaker #8 x 1" Tek Screw Left Speaker Cover Base Pad Right Speaker Cover...

  • Page 36: Exploded Drawing

    EXPLODED DRAWING A Model No. 831.25044.0 R0915A...
  • Page 37 EXPLODED DRAWING B Model No. 831.25044.0 R0915A...
  • Page 38 EXPLODED DRAWING C Model No. 831.25044.0 R0915A...
  • Page 39 EXPLODED DRAWING D Model No. 831.25044.0 R0915A...

  • Page 40: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

C950i

Table of Contents