■ About device adjustment
Bit Attachment
1.Bit attachment
· Bit attachment for BLF-2000 (Chart) -1
Push in and hold the Joint Shaft Collar into the
body of the screwdriver to insert the bit.
· Bit attachment for BLF-5000 / BLF-7000 Series
(Chart)-2
Pull up and hold the Joint Shaft Collar from the
body of the screwdriver to insert the bit.
2.Please confirm the attached bit is locked firmly.
BLF-2000 uses the bit of HIOS H4 ( ∅ 4).
· BLF-5000 and BLF-7000 use the bits of HIOS H5 ( ∅ 5).
* Please use HIOS genuine bits.
· The bit drive of BLF-7000X and BLF-7025X is 1/4 HEX. Please purchase the commercial
products.
(Caution) Please purchase the commercial bit with the specified shape.
9.0 mm
∅4 or ∅5
(Hex bit types that cannot be used)
● Hex bits with two recesses and double bits cannot be
used with this product.
- 7 -
● BLF-2000
(Chart)-1 Bit attachment
Push in and hold the Joint
Shaft Collar into the body
of the screwdriver to insert
the bit.
● BLF-5000 / BLF-7000 Series
(Chart)-2 Bit attachment
Pull up and hold the joint
shaft collar from the body
of the screwdriver to in-
sert the bit.