Clock Functions - AEG BP861510K User Manual

14 www.aeg.com

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).
Minute Minder
Duration
End Time
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use to activate the function. Press
to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
7.2 Setting the clock functions
• Before you use the
functions: Duration, End
Time, you must set a
heating function and
temperature first. The
appliance deactivates
automatically.
• You can use the
functions: Duration and
End Time at the same
time if you want to
automatically activate
and deactivate the
appliance on a given time
later.
• The functions: Duration
and End Time do not
work when you use the
core temperature sensor.
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or
time.
4. Press
to confirm.
or
to start.
to set the necessary