Advertisement
Available languages
Available languages
Attention
You mustn't push the products with your
fingers or other objects.
Note: In case of the necessity (In case
of excessive accumulation of the pulp
on the filter, which causes juice extractor
vibrations) you can use TURBO button
(b). The engine operates in such case
on maximal rotation for approximately
2 seconds. After this time, the TURBO
function switches off automatically, and
the engine returns to previous rotation.
Attention
Repeated usage of TURBO function can
take place after min. 10 seconds.
•
When centrifuging juice of small fruits,
use the bowl for small fruits (7), put it
on the chute.
•
Pour the extracted juice into glasses or
cups prepared in advance.
•
The juice collector (9) is equipped with
foam separator (10), which task is to
stop the thicker particles of juice and
foam.
After Operation
•
Switch the juice extractor off, turning the
switch (a) to position "0"
•
Unplug the appliance.
•
After the motor stops start to
disassemble the juice extractor in order
to wash the parts (see Preparing for
operation")
•
Remove the accumulated pulp from the
pulp collector.
Note: Prevent the excess of the pulp
collector. The excessive pulp can pour
out while leaning the collector during
removing.
Juice extractor maintenance rules
•
Clean carefully after each usage, to
prevent drying of juice and fruit remains.
•
Remove the dirt from the corners with
a bottle brush or tooth brush.
16
•
lean the motor with damped cloth
sprinkled with washing up liquid. Then
dry it.
Note: When water or juice getting into
the motor, stop operation immediately
and bring the appliance to service for
inspection.
•
The following elements of the equipment:
juice bowl, insert, and lid, bowl for small
fruits, pusher and the juice collector
including foam separator should be
washed in hot water with wash-up liquid.
•
You can clean them in dishwashers in
maximum temperature 60ºC.
•
The exception is a filter (4). It should be
washed with hard brush (13) only, which
is included to this juice extractor
equipment. Do not use any metal
brushes to clean the filter!
•
Some elements can change their colour
after long-term usage. It is not a defect.
•
Colour from carrot can be removed by
cleaning the surface with a cloth
immersed in edible oil
•
Dry carefully all parts after cleaning.
•
Assemble the juice extractor according
to instruction mentioned above (see
"Preparing for operation").
•
Roll the supplying cord inside the base
of juice extractor motor.
Note: Pay a special attention to
transparent plastic parts. They are the
most sensitive for hits and falls. They
can be easily damaged then.
Advertisement
