Fakir Premium Pro Instruction Manual page 12

Introduction
Thank you for purchasing Fakir Premium
Pro Fruit Extractor which has been
designed and manufactured to give you
many years of trouble-free service.
You may already be familiar with using
a similar product, but do please take
time to read these instructions – they
have been written to ensure you get the
very best from your purchase.
Safety is Important
To ensure your safety and the safety of
others, please ensure you read the
Safety Instructions before you operate
this product.Keep this information in a
safe place for future reference.
Appliance Characteristic
Fakir Premium Pro Fruit Extractor is an
electrical appliance for fast fruit and
vegetable juice centrifuging including
automatic pulp separation.
The raw material is pulped and then the
juice is centrifuged from the pulp. The
usage advantages are increased due to
the easy and simple operation. Electronic
speed stabilizer provides constant
rotation speed independent on loading,
which allows juice even consistency
obtaining. The juice extractor is equipped
with 2 centrifuging speeds (for soft and
hard fruit), which have been selected to
obtain the optimal quality parameters
for squeezed juice. Keeping the maximal
content of vitamins, pectin, enzymes
and minerals causes the lower juice
clarity. This is an intended effect, as the
juice extractor Manufacturer decided,
that keeping the highest nutrient, pro-
health and dietetic values of a juice is
more important than its clarity. The juice
extractor is equipped with special safety
system preventing starting it in case of
incomplete appliance assembling. The
juice extractor is additionally equipped
with filter selfcleaning function. After
pressing TURBO button the engine
operates 1,5 ÷ 2 seconds with high
12
rotation. High rotation helps to clean the
filter in case the vibration occurring due
to excessive pulp accumulation. TURBO
function can be used in 10 seconds
intervals only. The juice extractor can
operate 15 minutes without any break.
The quantity of juice obtained from i.e.
1kg of a raw material, depends on its
freshness, as well as on filter cleanness
and pulping blade condition.
The parts in contact with processed raw
materials are made of materials
permitted for contact with food.
Safety Operation Instructions
1. Do not disconnect the plug from the
socket pulling the cord.
2. The juice extractor must be plugged to
alternating current 230V grounded
receptacle.
3. Do not start up the appliance when the
supplying cord is damaged or the casing
is visibly damaged. If the non-detachable
part of the cord is damaged, it should
be replaced by the producer or at a
proper service point or by a qualified
person in order to avoid any hazards.
The appliance can be refurbished by
trained staff only. Improper refurbishment
can cause the serious hazard to the
user. In case of any defects occurrence,
contact the qualified service agent
immediately.
4. Do not use the juice extractor when the
filter is damaged.
5. Before you start the juice extractor up,
check the lid if it is locked well with the
locking bar.
6. Do not unfasten the locking during juice
extractor operation and filter wiring as
in such case the safety system will switch
the appliance off.
7. Switch off before you change the
equipment org et in contact with moving
parts while operation.
8. Unplug always before cleaning,
a s s e m b l i n g o r d i s a s s e m b l i n g .
9. Don't touch moving parts.
10. To push the product use the pusher only.