Date & Time Set Procedure - HoMedics BPW-710-CA Instruction Manual And Warranty Information

DATE & TIME SET PROCEDURE
1. To adjust the date and time, press the Date/Time Set
2. The display will show a blinking number showing the
3. Change the MINUTE, MONTH, DAY and YEAR as
15-0150 BPW-710-CA_IM_v3--03.indd 13
button located on the top of the monitor.
HOUR. Change the HOUR by pressing the
Each press will increase the number by one in a cycling
manner. Press the Date/Time Set button
confirm the entry, and the screen will show a blinking
number representing the MINUTE.
described in Step 2 above, using the
change the numbers and the Date/Time Set button
to confirm the entries.
repeat process to set MINUTE,
MONTH, DAY and YEAR
Press the button
blinking HOUR
increasing HOUR
confirm the entry
13
button.
again to
button to
2015/10/29 下午3:43