Date & Time Set Procedure - HoMedics Thera P BPA-150 Manual

DATE & TIME SET PROCEDURE
1. Slide the "On/Off" Switch located on the back
of the monitor into the "On" position.
2. To adjust the date/time, press the Set button
located on the back of the monitor.
3. The display will show a blinking number showing
the month. Change the month by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button
to confirm the entry, and the screen will show a
blinking number representing the day of the month.
4. Change the date and time as described in Step 2
above, using the
bers and the Set button
5. A "0" will reappear as the blood pressure monitor is
ready for measurement again.
button to change the num-
repeat process to set date and time
to confirm the entries.
Press the
blinking month
increasing month
confirm the entry
14
again
button
,