Disassembly
54
39. Once the display is in the slider inner, press down on the bezel retaining
features (red circles) to insure that the display is fully seated on the pad.
Figure 63. Installing and Seating the Display
40. Place the lower grounding clip onto the assembly over the lower part of the
hydra-flex and insert two mag. forming screws over the ground clip and into
the inner housing and secure with the T5 driver to .7 in Lbs.
Figure 64. Installing the Lower Grounding Clip
February 19, 2008
Screw
Z6m/Z6tv CDMA
Display
v463429
Grounding clip
Screw
v463358
6809513A80-B