Motorola MOTORIZR Z6tv Service Manual page 26

Disassembly
26
6. Carefully lift the transceiver board out of the front housing (see Figure 17).
Figure 17. Removing the Transceiver PC Board Assembly
7. To replace, install the slider assembly and then insert the transceiver board
assembly into the front housing with the hydra flex connector on top of the
transceiver PC board assembly.
Figure 18. Installing the Transceiver PC Board
8. Install the side buttons in the housing.
➧
Be sure the volume/smart/hold buttons and voice button are correctly positioned
in relation to the corresponding switches on the transceiver board. Verify operation
of the buttons after replacing the transceiver board and rear chassis assembly.
February 19, 2008
Z6m/Z6tv CDMA
Transceiver PC board
6809513A80-B
v527801
v527800