Disassembly
44
17. Lift the slider arm out of the retaining hole and slide it to the center of the
slider assembly as shown.
Figure 46. Removing the Slider Mechanism Part 2
18. Slide the slider mechanism all the way to the left as shown to separate it from
the slider assembly.
Figure 47. Removing the Slider Mechanism Part 3
19. Separate the slider arm (Spring Actuator with bushings) out of the retaining
hole on the guide metal. (Discard slider arm)
20. Separate the rails out of the slide inner assembly. (Discard the rails)
February 19, 2008
Z6m/Z6tv CDMA
v463382
v463383
6809513A80-B