Motorola MOTORIZR Z6tv Service Manual page 23

Level 1 and 2 Service Manual
6809513A80-B
8. When all the snaps are disengaged, carefully lift the rear housing straight up
and away from the phone.
9. To replace, carefully align the top of the front and rear housings.
10. Press to engage the middle snaps on the front and rear housings until the
catches snap into place.
11. Press to engage the bottom hooks.
12. Install the 4 machine screws and tighten with a Torx plus 5IP driver to a final
torque setting of 1.0 lbf in. Install the screws in the order shown below. Do not
over tighten.
Figure 13. Installing the Machine Screws
13. Install the 2 thread forming rear housing screws and tighten with the Torx
plus 6IP driver to a final torque setting of 1.2 lbf in. Do not over tighten.
14. Install the 2 screw grommets at the top of the rear housing.
15. Install the speaker cover on the rear housing.
16. Replace the battery, and battery cover as described in the procedures.
February 19, 2008
Screws
2
4
Screws
Disassembly
3
1
v463217
23