Level 1 and 2 Service Manual
Removing and Replacing the Keypad Mylar
G
6809513A80-B
The keypad mylar should be replaced when repairs are performed on the PCB
It is mandatory that the following special tools be used when following
this procedure:
Z6m/Z6tv EL Alignment- and Press Tool - part number 0-00-00-40878
Generic Press Fixture - part number 19501980 Available at the AMS Online-shop
www.online-shop.ams-fl.com/ (for access please contact your local Motorola
contact)
The Z6m/Z6tv EL alignment and press tool must be used for this replacement
procedure.
Figure 74. Z6m/Z6tv EL Alignment and Press Tool
February 19, 2008
Disassembly
v513343
63