Troubleshooting - Electrolux EWP10742 User Manual

9.

TROUBLESHOOTING

Certain problems are due to lack of simple maintenance or oversights, which can be solved
easily without calling out an engineer. Before contacting your local Service Centre, please carry
out the checks listed below.
During machine operation it is possible that the RED Start/Pause pilot light flashes to indicate
that the machine is not working.
Once the problem has been eliminated, press the Start/Pause button to restart the
program. If after all checks, the problem persists, contact your local Service Centre.
Malfunction Possible cause
The door has not been closed.
Display model: Error code:
None-Display model: Door lock '
and 'Start/Pause' LED flashing.
The washing
The plug is not properly inserted in the
machine
power socket.
does not
There is no power at the socket.
start:
The Start/Pause button has not been pressed.
The delay start has been selected.
The water tap is closed.
Display model: Error code:
None-Display model: Child lock '
and 'Start/Pause' LED flashing.
The inlet hose is squashed or kinked.
Display model: Error code:
None-Display model: Child lock '
The machine
and 'Start/Pause' LED flashing.
does not fill
The filter in the inlet hose is blocked.
the water:
Display model: Error code:
None-Display model: Child lock '
and 'Start/Pause' LED flashing.
The door is not properly closed.
model: Error code:
None-Display model: Door lock '
and 'Start/Pause' LED flashing.
The machine
The end of the drain hose is too low.
fills then
Display model: Error code:
empties
None-Display model: Child lock '
and 'Start/Pause' LED flashing.
immediately:
The machine
The drain hose is squashed or kinked.
does not
Display model: Error code:
empty
None-Display model: Washing End '
and/or does
and 'Start/Pause' LED flashing.
not spin:
.
' LED
.
' LED
.
' LED
.
' LED
Display
.
' LED
.
' LED
.
' LED
ENGLISH
Solution
Close the door firmly.
Insert the plug into the
power socket.
Please check your domestic
electrical installation.
Press the Start/Pause button.
If the laundry are to be
washed immediately, cancel
the delay start.
Open the water tap.
Check the inlet hose
connection.
Clean the water inlet hose
filter.
Close the door firmly.
Refer to relevant paragraph
in "water drainage" section.
Check the drain hose
connection.
27