Electrolux EWP10742 User Manual page 7

3.1 Program Selector Knob
Turn this knob to set a program.
The washing machine will propose
a temperature and automatically
select the spin value provided for
the program you have chosen.
The selector knob can be turned
either clockwise or anticlockwise.
Position " " to reset program/
switching OFF the machine.
At the end of the program the
selector dial must be turned to
position " ", to switch the
machine off.
3.2 Spin Selection Touchpad
Press this touchpad repeatedly to
increase or decrease the spin
speed, if you want your laundry to
be spun at a speed different from
the one proposed by the washing
machine.
No Spin
No spin option eliminates all the
spin phases and increase the
number of rinse.
Rinse Hold
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent
the laundry creases.
The door still locked to indicate that
the water must be emptied out.
To empty out the water:
Select "Spin" or "Drain" program.
Reduce the spin speed if needed.
Press the touchpad Start/Pause.
The appliance will drain the water
and then spin.
At the end of program the display
will show '
or Washing End '
come on (on none-display models)
and the '
goes off. The door can be opened.
3.3 Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your laundry
to be washed at a temperature
different from the one proposed by
the washing machine (symbol "
corresponds to cold wash).
3.4 Display
(Models : EWP10742, EWP85742)
A
B
A
Digital Number;
will tell you:
-
Washing cycle time.
- Delay start time.
- The alarm codes. Refer to the
chapter "Troubleshooting" for
their description.
B
Washing Phase icon
C
Delay Start icon
D
Child Lock icon
E
Door Lock icon
- It is on, you cannot open the
door.
- It is off, you can open the door.
ENGLISH
' (on display models)
' pilot lights
' (Door Lock) indicator
C D
E
7
"