Lifting Rod (Right); Top Link - Kubota M5660SUH Operator's Manual

46 3-POINT HITCH & DRAWBAR
2. Attaching and detaching implements
To avoid personal injury or death:
A Be sure to stop the engine.
A Do not stand between tractor and implement
unless parking brake is applied.
A Before attaching or detaching implement,
locate the tractor and implement on a firm level
surface.
A Whenever an implement or other attachment is
connected to the tractor 3-point hitch, check
full range of operation for interference, binding
or PTO separation.
A Do not exceed maximum allowable length of
right lifting rod, or the lifting rod will come apart
and the 3-point equipment may fall.
BLifting Rod (Right)
To avoid personal injury or death:
A Do not extend lifting rod beyond the groove on
the thread rod.
Level a 3-point mounted implement from side to side by
turning the adjusting handle to shorten or lengthen the
adjustable lifting rod with the implement on the ground.
After adjustment, lock adjusting handle with handle
stopper.
(1) Lifting rod
(2) Stopper
(3) Adjusting handle
(A) "GROOVE"
BTop Link
To avoid personal injury or death:
A When extending the top link, do not exceed the
groove on the top link thread, or the top link will
come apart and the 3-point equipment may fall.
1. Adjust the angle of the implement to the desired
position by shortening or lengthening the top link.
2. The proper length of the top link varies according to
the type of implement being used.

(1) Top link

A The length of the screw at both ends of the top link
must be the same always.
(A) "GROOVE"
(B) "Length of the screw"