Checking Tie-Rod Dust Cover; Every 100 Hours; Lubricating Grease Fittings - Kubota M5660SUH Operator's Manual

70 PERIODIC SERVICE
(1)
168 to 196
2WD (17.1 to 20.0)
[124 to 145]
260 to 304
4WD (26.5 to 31.0) (24.9)
[192 to 224] [180]
BChecking Tie-rod Dust Cover
1. Check to see that dust covers are not damaged.
2. If dust covers are damaged, consult local KUBOTA
Dealer for this service.
(1) Dust cover
A If dust covers are cracked, water and dust invade into
tie-rod and it will be early wear.
N-m (kgf-m) [ft-lbs.]
(2) (3)
---
260 to 304 244
(26.5 to 31.0) (24.9)
244
[192 to 224] [180]

EVERY 100 HOURS

BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
(4)
(1) Grease fitting (Knuckle shaft) [RH, LH]
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle support)