Kubota M5660SUH Operator's Manual page 42

20 OPERATING THE ENGINE
2. Make sure the fuel cock is in the
"OPEN" position.
(1) Fuel cock
3. Place the shift levers in "NEUTRAL"
position.
(1) Hydraulic-shuttle shift lever
(2) Main gear shift lever
(A) "CLOSE"
(B) "OPEN"
(N) "NEUTRAL POSITION"
4. Place the PTO clutch control lever in
"OFF" position and position control
lever in "LOWEST" position.
(1) PTO clutch control lever
(2) Position control lever
5. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(2) Foot throttle
"ON" "OFF"
(A) "DOWN"
"INCREASE"
"DECREASE"