Hydraulic-Shuttle Shift Lever; Front Wheel Drive Lever - Kubota M5660SUH Operator's Manual

BHydraulic-Shuttle Shift Lever
Raise up and shift the shuttle shift lever forward to obtain
forward speeds and shift back to obtain reverse speeds.
This shifting does not require clutch operation.
A The hydraulic-shuttle shift lever may be shifted while
the tractor is moving slowly.
A While the shuttle shift lever is at the "NEUTRAL"
position, the "N" character appears on the LCD
monitor.
(N) "NEUTRAL"
OPERATING THE TRACTOR
BFront Wheel Drive Lever
To avoid personal injury or death:
A Do not engage the front wheel drive when
traveling at road speed.
A When driving on icy, wet, or loose surfaces,
make sure the tractor is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed and engage front
wheel drive.
A An accident may occur if the tractor is
suddenly braked, such as by heavy towed
loads shifting forward or loss of control.
A The braking characteristics
between 2 and 4-wheel drive. Be aware of the
difference and use carefully.
Use the lever to engage the front wheels with the tractor
stopped. Shift the lever to "ON" to engage the front wheel
drive.

(1) Front wheel drive lever

A Tires will wear quickly if front wheel drive is engaged
on paved roads.
A Reduce the rear wheels traction before engaging the
front wheel drive lever.
C Front wheel drive is effective for the following
jobs:
1. When greater pulling force is needed, such as working
in a wet field, when pulling a trailer, or when working
with a front-end loader.
2. When working in sandy soil.
3. When working on a hard soil where a rotary tiller might
push the tractor forward.
4. For increased braking at reduced speed.
31
are different
(A) "ON"
(B) "OFF"