Preliminary Advice; User Manual; Operating Description; Complete System Arming - Gemini 932 Series Installation And Use Manual

Dear Customer, th e present manual illustrates the most fully featured alarm system; not all functions,
electrical connections etc. will therefore apply to all models.
Before installing, identify your alarm model and refer to it for the correct instructions
GEMINI 932: same as 933 without self-powered battery.
The following signs, intended for the installer or the user, indicate particular functions or connections
as follows :
!
This sign indicates that the system will work according to the connections and the
Press the lock button on the
chirp (if feature has been enabled) and a flash of the turn indicators.
The system has a 30" arming delay (indicated by the LED turned ON steady
2.2 - SYSTEM ARMING WITH SENSOR AND COMFORT FEATURE EXCLUSION
When the system is armed, the internal volumetric protection and comfort feature can be excluded as follows:
! Disarm the system and turn ignition key "OFF".
!
Show the electronic key to its receptacle; the LED will give out a quick flash
!
Close all vehicle doors and press the lock button on the original remote control
!
System arming is confirmed by the standard optical/acoustic signals
Exclusion of sensors and comfort feature is only bound to each single arming
When this function is programmed, the system passively arms approx. 60" after ignition switch OFF
and after the last door is opened and closed.
System activation is confirmed by the standard optical/acoustic signals.
If passive arming is enabled, the internal sensors and the comfort output (automatic
Opening a door 60" before the system is armed causes the procedure to interrupt; it is
The arming delay lasts approximately 30" and is signalled by the LED turned ON steady;
to exit the vehicle without triggering any alarm

1.0 - PRELIMINARY ADVICE

This sign highlights useful information.
programming selected or it simply provides useful installation tips.

USER MANUAL

2.0 - OPERATING DESCRIPTION

2.1 - COMPLETE SYSTEM ARMING

vehicle original remote control; system arming is confirmed by a siren
2.3 - PA
window roll-up) are excluded.
resumed once the door is closed.

2.4 - ARMING DELAY

For the user.
For the installer.
cycle.
SSIVE ARMING
.
.
).
.
.
.
it is possible
USER MANUAL - PAGE 03