Safety Precautions; Meaning Of Symbols; Safety Guidance And Information - ESAB EMP 215ic Instruction Manual

1 SAFETY PRECAUTIONS

1 SAFETY PRECAUTIONS
1.1

Meaning of symbols

As used throughout this manual: Means Attention! Be Alert!
DANGER!
Means immediate hazards which, if not avoided, will result in immediate,
serious personal injury or loss of life.
WARNING!
Means potential hazards which could result in personal injury or loss of
life.
CAUTION!
Means hazards which could result in minor personal injury.
1.2

Safety guidance and information

WARNING!
Before use, read and understand the instruction manual
and follow all labels, employer´s safety practices and Safety
Data Sheets (SDSs).
WARNING!
These Safety Precautions are for your protection. They summarize precautionary
information from the references listed in Additional Safety Information section.
Before performing any installation or operating procedures, be sure to read and
follow the safety precautions listed below as well as all other manuals, material
safety data sheets, labels, etc. Failure to observe Safety Precautions can result in
injury or death.
PROTECT YOURSELF AND OTHERS
Some welding, cutting and gouging processes are noisy and require
ear protection. The arc, like the sun, emits ultraviolet (UV) and other
radiation and can injure skin and eyes. Hot metal can cause burns.
Training in the proper use of the processes and equipment is essential
to prevent accidents. Therefore:
1. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes
when welding or watching.
2. Always wear safety glasses with side shields in any work area, even if welding
helmets, face shields and/or goggles are also required.
3. Use a face shield fitted with the correct filter and cover plates to protect your eyes,
face, neck and ears from sparks and rays of the arc when operating or observing
operations. Warn bystanders not to watch the arc and not to expose themselves to the
rays of the electric-arc or hot metal.
0463 407 001 - 4 - © ESAB AB 2017