ESAB EMP 215ic Instruction Manual page 13

2 INTRODUCTION
EM series
• ESAB EM 215ic power source
• Tweco Fusion™ 180 Amp MIG torch w/10 ft (3 m) cable / Tweco® pigtail w/(qty 1 ea
contact tip .023 in. (0.6 mm), .030 in. (0.8 mm), .035 in. (0.9 mm) w/Operator manual
all in one bag
• Victor® GF-250-50-580 argon flowgauge regulator
• Gas hose, 6.5 ft (2 m) Male 5/8-18UNF
• Tweco® 200 Amp ground clamp & lead assembly, 10 ft (3 m), 50 mm dinse
• ER70S-6, .030", 2 lb, 4" (100 mm) bobbin
• Drive roll, .023 in./.030 in. (0.6/0.8 mm) V-groove for mild steel and stainless wires
(Installed on drive system)
• Drive roll, .023 in./.035 in. (0.6/0.9 mm) V-groove for mild steel and stainless wires
• Drive roll, .030 in./.035 in. (0.8/0.9 mm) V-knurled for flux cored wires
• Contact tips, 1 ea, .023 in. (0.6 mm), .030 in. (0.8 mm), .035 in. (0.9 mm)
• Thickness gauge tool
• Power adapter (230 V to 120 V, 15 A)
• Safety manual
• CD (Contains instruction manual - English/French/Spanish, and optional accessory
product datasheets)
• Welding chart (French) Milar
• Quick start guide
0463 407 001 - 13 - © ESAB AB 2017