ESAB EMP 215ic Instruction Manual page 10

1 SAFETY PRECAUTIONS
ELECTRIC SHOCK - Can kill
• Install and earth the unit in accordance with applicable standards
• Do not touch live electrical parts or electrodes with bare skin, wet
gloves or wet clothing
• Insulate yourself from earth and the work piece
• Ensure your working position is safe
FUMES AND GASES - Can be dangerous to health
• Keep your head out of the fumes
• Use ventilation, extraction at the arc, or both, to take fumes and
gases away from your breathing zone and the general area
ARC RAYS - Can injure eyes and burn skin
• Protect your eyes and body. Use the correct welding darkening
screen and filter lens and wear protective clothing
• Protect bystanders with suitable screens or curtains
FIRE HAZARD
• Sparks (spatter) can cause fire. Make sure therefore that there are no
flammable/combustible materials nearby
• Take steps to monitor the work for fugitive sparks that could cause a
fire, either immediately or after smoldering over time
NOISE - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection with the
appropriate level of noise reduction/hearing protection.
MALFUNCTION - Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
WARNING!
Do not use the power source for thawing frozen pipes.
CAUTION!
This product is solely intended for arc welding.
ESAB has an assortment of welding accessories and personal protection equipment
for purchase. For ordering information contact your local ESAB dealer or visit us on
our website.
0463 407 001 - 10 - © ESAB AB 2017