Toshiba e-STUDIO163 Service Handbook page 192

18)Image dislocation in feeding direction
Defective area
Scanner/Printer adjust-
ment
Registration roller
Feed clutch
Pre-registration guide
e-STUDIO163/203 TROUBLESHOOTING
Fig. 5-18
Step Check items
1 Have the printed images been dislo-
cated in the same manner?
2 Is the registration roller dirty, or the
spring detached?
3 Is the registration roller working prop-
erly?
4 Is the feed clutch working properly?
5 Is the pre-registration guide installed
properly?
5 - 36
Prescription
Adjust the position of the leading
edge of paper in the Adjustment
Mode.
Clean the registration roller with alco-
hol.
Securely attach the springs.
Adjust or replace the gears if they are
not engaged properly.
Check the circuit or feed clutch, and
replace them if necessary.
Install the guide properly.
December 2005 © TOSHIBA TEC