Installing the NK-1
Tools required:
• Phillips screwdriver (if using rack-mount brackets)
• Computer with Ethernet interface and a web browser (an integrated DB-9 port or USB-to-
Serial adapter may be necessary if you would like to use the console interface.)
• Ethernet cable
Installation
1 Open the box and remove the NK-1.
2 If mounting the NK-1 in a standard 19" AV rack, attach the included rack-mount brackets
to the sides of the NK-1. If not
mounting to a rack, ensure that
the NK-1 is physically mounted
near power and network
connections (such as a backbone
switch or firewall/router).
3 Connect power to the device.
4 Connect an Ethernet cable from your
computer to the LAN port on the NK-1.
You are now ready to configure the NK-1 to an IP
Access Point's
address that matches your network.
3
3