Page 2
NK-1 Package contents Your NK-1 includes a Wireless Access Point Controller and a Network Patroller. Refer to the Access Points label on the package to determine the number of access points the controller can manage. Default Settings IP Address: 192.168.1.240...
Page 3
• Ethernet cable Installation 1 Open the box and remove the NK-1. 2 If mounting the NK-1 in a standard 19” AV rack, attach the included rack-mount brackets to the sides of the NK-1. If not mounting to a rack, ensure that...
Page 4
The NK-1-CP includes both the NK-1-NP Network Cloud Patroller and the NK-1-CG1 Wireless Access Point. 1 Connect the NK-1 to power and press the power switch on the rear panel. The PWR LED will light up. 2 Connect a computer to the NK-1 through an Ethernet cable. Enter 192.168.1.240 into the address bar of your web browser.
Page 5
The Dashboard appears. The NK-1-CP Dashboard lets you navigate to the NK-1-NP Network Cloud Patroller and the NK-1-CG1 Wireless Controller. 4 To configure Wireless, see “Configuring the Wireless Access Point Easy Wizard” on page 6. To access the Patroller, see “Navigating to the Patroller Dashboard” on...
Page 6
Otherwise, hover over the Wizard menu and click Run Wizard. 3 Click Start the Easy Wizard to begin the wizard setup. 4 For more information on using your NK-1, see the Bakpak User Guide. Navigating to the Patroller Dashboard To navigate to the Patroller Dashboard:...
Page 7
Creating a Bakpak Cloud Account from the cloud 1 Open a web browser and enter the following URL: https://mybakpak.com 2 Click [Create a] Dealer Admin Account. The Register for mybakpak page opens. 3 Follow the on-screen instructions to get your Dealer Code. 4 Enter your email address, new password, time zone, and Dealer Code, then click Register.