Device Identification; Nameplate; Certificates And Approvals - Endress+Hauser Thermophant T TTR31 Operating Manual

TTR31, TTR35
2

Device identification

2.1

Nameplate

To identify your device, compare the complete order code and the version information on the
delivery papers with the data on the nameplate.
Fig. 1: Nameplate for device identification (as example)
m
Order code
n
Serial number
o
TAG number
p
Release number (change status)
q
Connection values
!
Note!
The release number indicates the change status of the device. A change in the last two figures
does not have any affect on the compatibility - see also
2.2

Certificates and approvals

CE mark, declaration of conformity
On leaving the factory, the device was in perfect condition from the point of view of safety. It
complies with the standards EN 61010 -1 "Protection Measures for Electrical Equipment for
Measurement, Control, Regulation and Laboratory Procedures" and with the EMC requirements
of IEC/EN 61326. The device meets the legal requirements of the EU Directives. The
manufacturer confirms a positive completion of all tests by fitting the unit with a CE mark.
Hygiene standard
The TTR35 temperature switch meets the requirements of Sanitary Standard no. 74-03.
Endress+Hauser confirms this by applying the 3–A symbol (not valid for process connection
conical metal-metal).
Endress+Hauser
r
Connection diagram
s
Measuring range
t
Ambient temperature
u
Degree of protection
v
Approvals
→
Chap. 8.
Device identification
A0008138
5