Add Channel Metadata - epiphan Pearl-2 User Manual

Pearl-2 User Guide
1. Create Channel 1 with your video and audio inputs. Add all your live switching layouts.
2. Copy the RTSP stream link from Channel 1's status page. (See image below)
3. Add a new RTSP source using the link copied in step 2.
4. Create Channel 2 with just one layout and add the new RTSP source you created in step 3. (See image
below.)
5. For Channel 2's audio source, choose the RTSP source you created in step 3.
6. Set encoding and streaming settings for channel 2.
Using this process, you can again use the same video you're recording on Channel 2, and stream it at a
different bitrate and frame size.
For a different process that helps you accomplish similar goals, you can learn about a multi-publishing

Add channel metadata

Adding company information to metadata is an easy way to identify and copy protect your broadcast or
recording.
This section describes the following topics for customizing your channel:
Add channel metadata
l
Remove metadata from a channel
l
Add channel metadata
Stream
223